The Process of Solar Panel Installation

Having solar panels installed at your home is a great way to help the environment. It can also lower your energy bill. You may want to check out Solar Panel Installation for more. You will also be able to take advantage of federal and government rebates and incentives. However, there are also some steps that you need to take before you install your solar panels.

First, you need to prepare the work site. This includes clearing any debris or obstructions that may be blocking the view of the panels. You may also need to seal the roof to prevent leaks. You also need to make sure there is enough room for the panels to be installed.

Next, you need to prepare the electrical wiring. You may need to install a back feed breaker or a breaker panel. This breaker is designed to allow the system to feed power into the city electric grid. In addition, you will need to install a battery bank if you choose to have one. You should also consult your utility company to make sure your system is in compliance with the rules and regulations for your area.

Once the electric wiring is complete, you will need to place your panels on the racking system. The mounting structure must be slightly tilted to allow for maximum sunlight exposure. The frame of the solar panel includes slots that allow for vertical adjustment. The spacing of the mounting holes on the back of the solar panel will be specified on the panel’s spec sheet.

Next, you will need to install the backfeed breaker and solar backfeed breaker. You should also install a meter that will track how much electricity the panels are producing. This will help you determine the optimum amount of current to draw from your panels.

Once all of the electric wiring is installed, you need to connect the panels to the inverter. This will turn the direct current into alternating current. The inverter is typically located near the main panel. However, you may want to consider installing the inverter in an area that is cooler. In some states, you will also need to place three feet of clear space around the panels.

Having solar panels installed at your home is not as difficult as you may think. However, it will take a few weeks to a month for the installation to be approved. In addition, you will need to apply for a building permit and receive normal inspections.

You will also need to apply for a solar rebate from the government and apply for a clean energy financing initiative in your area. You should also research the best solar panels for your home.

Once you have all the electrical wiring in place, you should connect the solar panels to the inverter. You may also want to turn on the solar backfeed breaker last to test the system. This is a good time to see how much electricity your panels are producing at different times of the day.

Related Posts